Community Roofing
Service Areas

Our team tackled an aging, cracking modified bitumen roof and a failing chimney crown. We carefully dismantled the failing masonry chimney below the roof line and patched the opening with new deck boards. After removing the old roof down to the substrate, we installed 1/2" mechanically fastened ISO cover board. We then fully adhered a seamless 60-mil Mule-Hide EPDM rubber membrane using custom 26-gauge coated steel aprons along all edges and pitched roof transitions. We finished by installing new rubber stack boots with water stop mastic, detaching and resetting the existing gutters with proper straps and screws, and re-securing the original gutter guards. The home is now fully weather-sealed, streamlined, and leak-free.

A dual-system replacement addressed both sloped and flat roof areas for this home! Our crew stripped the single layer of asphalt shingles down to the deck, installed six feet of ice and water shield along eave edges, and laid a CertainTeed NorthGate shingle system in Silver Birch with Terra Bronze W-valleys, white drip edges, and white gutter aprons. On the low-slope roof, we stripped down to the decking, installed mechanically fastened ISOGARD HD cover board, treated 2x6 edge nailers, and fully adhered a black 60-mil EPDM rubber membrane with matching black metal aprons. Detailed work included removing the unused masonry chimney below the deck line, reinstalling the TV antenna, adding eight slant-back box vents, and updating lead stack flashings. Another Wauwatosa residence fully weather-sealed and restored!

Our team executed a thorough multi-phase renovation, transforming both the house and detached garage. We began by removing the old shingle layer on the house, installing 7/16" OSB re-decking, and laying a CertainTeed Landmark shingle system in Moiré Black. This was complemented by synthetic underlayment, 6 feet of eave ice & water shield, Desert Sand drip edges, black W-valleys, edge intake, and louvered ridge vents. We also installed reglet-cut steel chimney counter-flashing. The old vinyl siding was stripped, and both structures were wrapped in Tyvek, followed by the installation of 8" LP SmartSide Lap Siding in Garden Sage with Board & Batten accents, 4" LP outside corner posts, and Norandex Desert Sand aluminum soffit and 8" fascia. The project concluded with the installation of 187 LF of new 6" seamless aluminum gutters and 105 LF of 4" downspouts across both structures, ensuring a fully weather-sealed and restored property.

Addressing multi-layer removal across a historic home guided this project on East Bradford Avenue in Milwaukee. Our crew stripped two layers of existing material—including asbestos shingles and old cedar shakes—down to the deck structure, laying a CertainTeed Landmark shingle system in Burnt Sienna protected by synthetic underlayment, six feet of eave ice and water shield, brown W-valleys, brown drip edges, and brown gutter aprons. Detailed flashing work included custom copper front porch sawtooth flashing, 26-gauge steel reglet-cut chimney counter-flashing, lead stack boots, a Zipper electrical mast boot, six slant-back box vents, and low-slope SBS Flintlastic modified bitumen over the eyebrow dormers with prepped stucco integration. Another historic Milwaukee residence fully protected, watertight, and expertly preserved!

Our team addressed significant deck gaps and moisture concerns with a comprehensive dual-structure project. We began by removing the existing asphalt roofing from both the house and the detached garage. We then applied 7/16" OSB re-decking over the original roof boards to create a solid foundation and ensure full warranty compliance. For the shingle system, we installed CertainTeed Landmark in Resawn Shake, supported by 6 feet of ice and water shield on heated eave edges, synthetic underlayment, and brown pre-finished steel W-valleys. Our metalwork included white aluminum drip edges, new plumbing stack flashings, Broan-style anti-draft-back vents, and a 26-gauge steel chimney flashing with a continuous reglet-cut finish in brown. The project successfully updated, reinforced, and weather-sealed the structures.

Our team addressed water intrusion on specific shingled roof areas, ensuring a comprehensive update. We removed existing asphalt shingles down to the structure, installing a 7/16" OSB re-decking layer over the original roof boards to meet full manufacturer warranty standards. We then applied a CertainTeed Landmark shingle system in Heather Blend, backed by six feet of ice and water shield membrane on heated eaves, full synthetic underlayment, and Terra Bronze metal valleys. Additional work included replacing the north facet bathroom vent, removing an unused satellite dish, and installing new step and wall flashings. We also installed custom Reglet-cut 26-gauge steel chimney counter-flashing in Terra Bronze, ensuring the home is fully weather-sealed and protected against future interior leaks.

Tearing off a single layer of aging asphalt down to the roof boards prepared this steep-pitch residence for a complete weatherproofing upgrade in Milwaukee! Our crew installed 7/16" OSB re-decking before laying a CertainTeed Landmark PRO shingle system in Max Def Red Oak, backed by six feet of ice and water shield along heated eaves, synthetic underlayment, and pre-finished brown W-style metal valleys. Specialty craftsmanship included mimicking historic sawtooth step flashing along the front wall facade while applying straight reglet-cut steel counter-flashing on the sides and back, installing an oversized chimney flashing with a custom cricket, fabricating a metal pan transition area, and re-flashing around the existing skylight. We completed the job by updating lead pipe stack boots, adding a Broan bath vent, setting up a ridge vent system to match the existing attic airflow, and reattaching the original gutters with new heavy-duty aluminum fascia brackets and screws.

Our team successfully completed a comprehensive roof overhaul, starting with the removal of two layers of aged asphalt shingles. We installed 7/16" OSB re-decking over the original tongue-and-groove boards, ensuring full manufacturer warranty compliance. We then applied a CertainTeed NorthGate Class 4 impact-resistant shingle system, protected by 6 feet of WinterGuard ice and water shield. Additional features included synthetic underlayment, pre-finished steel W-valleys, aluminum drip edges, and gutter aprons. Our complete penetration detailing involved new step and wall flashings, plumbing stack flashings, and custom vents. The project concluded with a full water management upgrade, featuring new 6" seamless aluminum gutters and matching downspouts.

Our team addressed localized storm damage, ensuring every affected section was restored. We removed loose shingles to inspect the decking and underlayment, replacing any compromised materials. Prepping the substrate with new underlayment, we installed CertainTeed Landmark PRO field shingles in Evergreen, matching the existing roofing patterns. Ridge cap shingles were added to seal the ridge line, ensuring complete water-shedding protection. The home is now weather-sealed and fully restored.

Our team meticulously stripped an asphalt layer, exposing the deck structure for a comprehensive exterior upgrade. We installed six feet of ice and water shield along heated eaves and around all roof penetrations. Next, we laid a CertainTeed Landmark shingle system in Moiré Black, supported by synthetic underlayment. The project included detailed metalwork, such as 30' white aluminum drip edges, 30' white gutter aprons, black pre-finished W-valleys, step/wall flashings, and 26-gauge reglet-cut steel chimney counter-flashing. We also installed new plumbing vent stack flashings, two anti-draft-back Broan bath vents, and a louver-style ridge vent. Finally, we detached, re-pitched, and resecured the existing gutters with heavy-duty aluminum fascia brackets and screws. Another Glendale property fully weather-sealed, properly ventilated, and protected for years to come!